What Is Travertine Flooring?

Limestone is one of the most popular stones in the construction stones family for aesthetic reasons like its marble-like texture and fibrous quality with the earthy tones. Travertine is one of the attractive forms of limestones, which is formed in deposits around mineral springs. The tiles made from travertine are popularly have been extensively used as flooring tiles, even through history, it was extensively used in various countries around the world. 

It has remained popular in urban architecture but only in Sydney CBD’s high-end housing estates and commercial zones. This is because travertine, like most naturally mined stones, tends to be expensive. But it is often used as a marble alternative in Sydney CBD buildings as it is more cost-effective and has a similar finish once it has been polished and honed. 

Travertine Cleaning and Filling in Sydney CBD

Although expensive, Travertine tends to be quite durable and robust. It can endure almost every kind of staining or corrosive and damaging impact, yet it is not entirely immune to damage. This is why if you have purchased a home with travertine floors or installed travertine tiles in a personally owned commercial area in Sydney CBD, you will need travertine cleaning and filling services. Let us first go over how travertine cleaning is performed. 

Travertine Cleaning

As a precaution, the recommended way to keep travertine floors clean in the long run is to have them sealed before installation. This will ensure that a barrier forms over the stone, preventing staining and discolouration by repelling dirt and moisture from sinking through them, thus maintaining their newly polished, unsullied state.

Ensure that you do not use harsh and abrasive cleaning agents for cleaning travertine floors, as that may result in permanent discolouration. Remember also not to clean with a mop that’s too wet, as repeated exposure to high moisture levels will dull the polishing of travertine and make it mouldy. Instead, try to use a dampened microfibre mop for travertine cleaning rather than typically used cotton mops. Microfibre is better because it would absorb the dirt within its fibres instead of embedding it more into the travertine surface. 

Besides these tips for regular maintenance, you may also need routine Travertine cleaning and filling maintenance, so look for a reputed business that performs this service in the Sydney CBD area. 

Travertine Filling

Unpolished and unhoned raw, natural travertine stones have many groves, pits and holes in them. These flaws make travertines unique and desirable in construction; however, these flaws are usually polished before installation. But travertine floors still require special care as these groves may develop later too as the tiles age.

One such care includes travertine filling with sealing, so dirt and debris cannot sink into the pits and holes. Sealing and filling in travertine floors ensure your floor stays looking new and clean. Various concrete servicing companies across Sydney CBD perform the task of both travertine cleaning and filling. 

The first step of Travertine cleaning and filling is applying a sealant that would need some time to dry off. After the cement has dried, a stone filler resin or grout is used to fill in the gaps that match the colour of the travertine. Once this filling agent has dried, excess filler residue needs to polished away with a buffing and scrubbing machine. 

The second coat of sealant would be applied once leftover residue and dust are cleaned off so that further moisture and dirt cannot seep in. This will restore the original smooth appearance of polished, smooth travertine. Other services performed to additionally enhance the look of travertine after filling, like grinding and lippage removal, honing and polishing, colour improving etc. If you wish to have these services done along with travertine cleaning and filling, be sure to hire a reputed service from the Sydney CBD area.


Enjoy this blog? Please spread the word :)